User's Manual Part 3

03/24/09 - DRAFT
030-300554 Rev. C 149 March 2009
Verizon FiOS Router
(
Model 9100EM
)
User Guide
15.5 ARP Table
If you click the ARP Table link in the Advanced screen, the following screen appears. This screen allows you to set
up static DHCP connections using Host Names, IP Addresses, or MAC addresses. To configure a static DHCP
connection, click the New Static Connection link.
If you clicked New Static Connection, the following screen appears. Enter the appropriate values in the fields
provided, and then click OK to continue.
NOTE: You can have a total of 253 static LAN devices connected to your Verizon Router.
• Enter a host name for this connection.
• Enter the fixed
IP address to assign to the computer.
• Enter the
MAC address of the computer’s network card.
NOTE: A device’s fixed
IP address is actually assigned to the specific network card’s MAC address installed on the
network computer. If this network card is replaced, the device’s entry in the DHCP Connections list must be updated
with the new network card’s MAC address.