Installation manual

GENERATOR AC VOLTAGE CONNECTIONS
BE THREE PHASE
VOLTAGE REGULATORS
THREE PHASE CONNECTIONS
. The regulator is equipped with seven numbered terminals
(0 to 6) and their related brass jumpers. The illustrations
shown connection points and jumpers for the 3 phase con-
figuration of the generator. The sensing leads connect
between
pin #1 and pin #2 on the AC terminal block and
connection #2 and #0 on the voltage regulator board.
NOTE: Either Series configuration requires the installation of
a jumper on the regulator board between terminal B and 0.
170- 270V
--.,
__ J60 Hz
AC TERMINAL CONNECTIONS
THREE PHASE 12 WIRE
PARALLELVJVE(STAR)
l-N -120 VAC 10 60HZ l-l- 208 VAC 30 50 HZ
l-N -110 VAC 10 60 HZ l-l-190VAC 30 50 HZ
SERIES VJVE (STAR)
l-l- 450 VAC 30 60 HZ l -l- 380 VAC 30 50 HZ
l-N - 265 VAC 10 60 HZ
USE #10 AWG FOR
JUMPER WIRES
REPOSITION THE
GROUND AS SHOWN
l·N - 230 VAC 10 50 HZ
L2
L3
N
SERIES DELTA
l -l- 240 VAC 30 60 HZ l·l- 230 VAC 30 50 HZ
l2, l3 -N -110 VAC 10 60 HZ l2, l3 -N ·115 VAC 10 50 HZ
Engines & Generators
42