Installation manual

SPECIFICATIONS 11.5KW BTD
AC GENERATOR (Single Phase)
Single Phase
Voltage
Voltage
regulation:
Frequency regulation:
Rating (Volts AC)
60 Hertz (1800 rpm)
11.5KW
50 Hertz (1500 rpm)
9.2KW
Generator Cooling
Air Requirements
(60 Hertz) at 1800 rpm
Generator Compartment
Ambient Temperature
Recommendations
Brushless, four-pole, revolving field.
Pre-lubricated, single bearing design.
Reconnectable, single phase transformer
regulation (optional solid-state voltage
regulation) ..
120 or 120/240 Volts - 60 Hertz
230 Volts - 50 Hertz
± 5% no load to full load.
.3 Hertz (.5%) no load to full load.
120 Volts 95.8 Amps
120/240 Volts 95.8/47.9 Amps
230 Volts
40Amps
225 - 250 cfm (5.66 - 6.37 cmm)
NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
122"F (50"C) maximum
NOTE: Forced ventilation should be provided
to maintain generator compartment
temperature below 122"F (50"C)
AC GENERATOR (3 Phase)
General - 3 Phase
11.5 KW- 60 Hertz
9.2 KW- 50 Hertz
Voltage - 3 Phase
(60 Hertz)
Voltage - 3 Phase
(50 Hertz)
Amperage - 3 Phase
(60 Hertz)
Amperage - 3 Phase
(50 Hertz)
Generator Cooling
Air Requirements
(60 Hertz) at 1800 rpm
Generator Compartment
Ambient Temperature
Recommendations
Brushless six pole, revolving field. Sealed
lubricated single bearing design. 12 Lead
reconnectable for low voltage WYE, high
voltage Delta. Solid State voltage regulator
with protection circuitry.
Low voltage WYE
High voltage WYE
DELTA
High voltage WYE
DELTA
Low voltage WYE
High voltage WYE
DELTA
240volts
480 volts
240 volts
400 volts
230 volts
34Amps
17 Amps
34Amps
High voltage WYE 16 Amps
DELTA 29 Amps
225 - 250 cfm (5.66 - 6.37 cmm)
NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
122"F (50"C) maximum
NOTE: Forced ventilation should be provided
to maintain generator compartment
temperature below122'f (50"C)
SPECIFICATIONS 12.5KW BTDB
AC GENERATOR (Single Phase) AC GENERATOR (3 Phase)
Single Phase Brushless, four-pole, revolving field.
General - 3 Phase
Brushless six pole, revolving field. Sealed
Pre-lubricated, single bearing design. 12.6 KW- 60 Hertz lubricated single bearing design. 12 Lead
Reconnectable, single phase transformer 10.4 KW- 50 Hertz
reconnectable for low voltage WYE, high
regulation (optional solid-state voltage voltage Delta. Solid State voltage regulator
regulation) ..
with protection circuitry.
Voltage 120 or 120/240 Volts - 60 Hertz Voltage - 3 Phase Low voltage WYE 240volts
220 Volts - 50 Hertz
(60 Hertz)
High voltage WYE 480 volts
Voltage regulation:
± 5% no load to full load.
DELTA 240 volts
Voltage - 3 Phase
High voltage WYE 400 volts
Frequency regulation: ± 3 Hertz (5%) no load to full load.
(50 Hertz)
DELTA
230 volts
Rating (Volts AC)
Amperage - 3 Phase Low voltage WYE
34Amps
60 Hertz (1800 rpm) 120 Volts
98.5 Amps
(60 Hertz)
High voltage WYE
19 Amps
12.5KW 120/240 Volts
195.8/49.9 Amps
DELTA
34Amps
50 Hertz (1500 rpm)
230 Volts
40Amps
Amperage - 3 Phase
High voltage WYE 18Amps
10.4KW
(50 Hertz)
DELTA
32Amps
Generator Cooling 225 - 250 cfm (5.66 - 6.37 cmm)
Generator Cooling
225 - 250 cfm (5.66- 6.37 cmm)
Air Requirements
Air Requirements
(60 Hertz) at 1800 rpm
NOTE: Increase air supply 15% for 50 Hertz
(60 Hertz) at 1800 rpm
NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
operation (1500 rpm)
Generator Compartment
122"F (5o•c) maximum
Generator Compartment
122•F (50"C) maximum
Ambient Temperature
Ambient Temperature
Recommendations
NOTE: Forced ventilation should be provided
Recommendations NOTE: Forced ventilation should be provided
to maintain generator compartment
to maintain generator compartment
temperature below122'F (50"C)
temperature below122'F (50"C)
49