Installation manual

SPECIFICATIONS 12.5KW BTDB
AC GENERATOR (Single Phase)
Single Phase
Voltage
Voltage regulation:
Frequency regulation:
Rating (Volts AC)
60 Hertz (1800 rpm)
12.5KW
50 Hertz (1500 rpm)
9.3KW
Generator Cooling
Air Requirements
(60 Hertz) at 1800 rpm
Generator Compartment
Ambient Temperature
Recommendations
Brush less, four-pole, revolving field.
Pre-lubricated, single bearing design.
Reconnectable, single phase transformer
regulation (optional solid-state voltage
regulation).
120 or 120/240 Volts - 60 Hertz
230 Volts - 50 Hertz
± 5% no load to full load.
± 3 Hertz (5%) no load to full load.
120 Volts 104 Amps
120/240 Volts 104/52 Amps
230 Volts 60 Amps
225- 250 cfm (5.66- 6.37 cmm)
NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
122•F (50•C) maximum
NOTE: Forced ventilation should be provided
to maintain generator compartment
temperature below 122•F (50•C)
AC GENERATOR (3 Phase)
General - 3 Phase
12.5 KW- 60 Hertz
9.3 KW -50 Hertz
Voltage - 3 Phase
(60 Hertz)
Voltage - 3 Phase
(50 Hertz)
Amperage - 3 Phase
(60 Hertz)
Amperage - 3 Phase
(50 Hertz)
Generator Cooling
Air Requirements
(60 Hertz) at 1800 rpm
Generator Compartment
Ambient Temperature
Recommendations
Brush less six pole, revolving field. Sealed
lubricated single bearing design. 12 Lead
reconnectable for low voltage WYE, high
voltage Delta. Solid State voltage regulator
with protection circuitry.
Low voltage WYE 208 volts
High voltage WYE
480 volts
DELTA
240 volts
High voltage WYE 380 volts
DELTA
230 volts
Low voltage WYE
43Amps
High voltage WYE
17 Amps
DELTA 37 Amps
High voltage WYE 17 Amps
DELTA 30 Amps
225- 250 cfm (5.66- 6.37 cmm)
NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
122•F (50•C) maximum
NOTE: Forced ventilation should be provided
to maintain generator compartment
temperature below12:!'F (50•C)
SPECIFICATIONS 15KW BTDC
AC GENERATOR (Single Phase)
Single Phase
Voltage
Voltage regulation:
Frequency regulation:
Rating (Volts AC)
60 Hertz (1800 rpm)
50 Hertz (1500 rpm)
Generator Cooling
Air Requirements
(60 Hertz) at 1800 rpm
Engine Combustion Air
Requirements @60Hz
1800 rpm
Generator Compartment
Ambient Temperature
Recommendations
Brushless, four-pole, revolving field.
Pre-lubricated, single bearing design.
Reconnectable, single phase transformer
regulation (optional solid-state voltage
regulation) ..
120 or 120/240 Volts - 60 Hertz
220 Volts - 50 Hertz
± 5% no load to full load.
.5 Hz (.60%) no load to full load.
(Electronic Govemered)
Non-Electric ± 3 Hertz
120 Volts 125 Amps
120/240 Volts 195.8/49.9 Amps
230 Volts 60 Amps
225- 250 cfm (6.37- 705 cmm) '
NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
56 cfin (1.9 cern)
122•F (50.C) maximum
NOTE: Forced ventilation should be provided
to maintain generator compartment
temperature below12:!'F (50•C)
51
AC GENERATOR (3 Phase)
General - 3 Phase
15.0 KW- 60 Hertz
12.0 KW- 50 Hertz
Voltage - 3 Phase
(60 Hertz)
Voltage - 3 Phase
(50 Hertz)
Amperage - 3 Phase
(60 Hertz)
Amperage - 3 Phase
(50 Hertz)
Generator Compartment
Ambient Temperature
Recommendations
Brush less six pole, revolving field. Sealed
lubricated single bearing design. 12 Lead
reconnectable for low voltage WYE, high
voltage Delta. Solid State voltage regulator
with protection circuitry.
Low voltage WYE 208 volts
High voltage WYE 480 volts
DELTA 240 volts
High voltage WYE
400 volts
DELTA 230 volts
Low voltage WYE 52 Amps
High voltage WYE 22 Amps
DELTA 45 Amps
High voltage WYE 22 Amps
DELTA 39 Amps
122•F (5o•c) maximum
NOTE: Forced ventilation should be provided
to maintain generator compartment
temperature below12:!'F (500C)