Installation manual

SPECIFICATIONS 11.0 BTDB
AC GENERATOR (Single Phase) AC GENERATOR (3 Phase)
Single Phase
Brush less, four-pole, revolving field.
General - 3 Phase Brush less six pole, revolving field. Sealed
Pre-lubricated, single bearing design.
11.5 KW- 60 Hertz lubricated single bearing design. 12 Lead
Reconnectable, single phase transformer 9.2 KW - 50 Hertz
reconnectable for low voltage WYE, high
regulation (optional solid-state voltage
voltage
Delta. Solid State voltage regulator
regulation).
with protection circuitry.
Voltage
120 or 120/240 Volts - 60 Hertz
Voltage - 3 Phase Low voltage WYE 240 volts
230 Volts - 50 Hertz
(60 Hertz) High voltage WYE
480 volts
Voltage regulation:
± 5% no load to full load.
DELTA 240 volts
Voltage - 3 Phase High voltage WYE
400 volts
Frequency regulation: .5 Hz (.60%) no load to full load.
(50 Hertz)
DELTA
230 volts
Rating (Volts AC)
Amperage - 3 Phase
Low voltage WYE
33Amps
60 Hertz (1800 rpm)
120 Volts 91.7 Amps
(60 Hertz)
High voltage WYE
16 Amps
11.0KW
120/240 Volts 91.7/45.8 Amps
DELTA 33Amps
50 Hertz (1500 rpm)
230 Volts 38.3 Amps
Amperage - 3 Phase
High voltage WYE
15 Amps
8.8KW
(50 Hertz) DELTA
27 Amps
Generator Cooling
225 - 250 cfm (5.66 - 6.37 cmm)
Generator Cooling
225 - 250 cfm (5.66 - 6.37 cmm)
Air Requirements
Air Requirements
(60 Hertz) at 1800 rpm NOTE: Increase air supply 15% for 50 Hertz
(60 Hertz) at 1800 rpm NOTE: Increase air supply 15% for 50 Hertz
operation (1500 rpm)
operation (1500 rpm)
Generator Compartment
122°F (50°C) maximum
Generator Compartment 122°F (50°C) maximum
Ambient Temperature
Ambient Temperature
Recommendations NOTE: Forced ventilation should be provided
Recommendations NOTE: Forced ventilation should be provided
to maintain generator compartment
to maintain generator compartment
temperature below 122°F (50°C)
temperature below 122'F (50°C)
51 a