Specifications
REMOTE
OIL
FILTER
(OPTIONAL)
INSTALLATION
This popular accessory is used to relocate the engine's oil fil-
ter from the engine to a more convenient
10catioQ
such as an
engine room bulkhead.
NOTE:
Refer
to
the ENGINE OIL CHANGE page
in
this man-
ual for instructions
on
removing the oil
filter.
ยท20
KW
CONNECTION
SHOWN
APPLY
A
THIN
COAT
OF
CLEAN
OIL
TO
THE
O-RING
WHEN
INSTALLING
THIS
ADAPTER.
THREAD
THE
ADAPTER
ON,
THEN
TIGHTEN
(BY
HAND)
AN
ADOITIONAL
3/4
TURN
AFTER
THE
O-RING
CON-
TACTS
THE
BASE.
To
install, simply remove the engine oil filter and thread on
WESTERBEKE's remote oil filter kit as shown. Always
install this kit with the oil filter facing down as illustrated.
Contact your WESTERBEKE dealer for more information.
NOTE:
Westerbeke
is not responsible
for
engine failure
due
to
incorrect installation
of
the Remote Oil
Filter.
FASTEN
SECURElY
TO
A
BULKHEAD
(SCREWS
ARE
OWNER
SUPPLIED)
APPLY
A
THIN
COAT
OF
CLEAN
OIL
TO
THE
FILTER
GASKET
WHEN
INSTALLING.
ONCE
THE
FILTER
CONTACTS
THE
BASE,
THEN
TIGHTEN
IT
AN
ADDITIONAL
3/4
TURN.
Engines & Generators
18