Installation manual

REMOTE OIL FILTER (OPTIONAL)
INSTALLATION
Irhls popular accessory is used to relocate the engine's oil fil-
iN from the engine to a more convenient location such as an
engine room bulkhead. .
tlOTE: Refer to ENGINE OIL CHANGE in this manualfor
Instructions on removing the oil filter. .
trb install, 'simply remove the engine oil filter and thread on
WEsTERBEKE's remote oil filter kit as shown. Always
lnstall this kit with the oil filter facing down as illustrated.
Contact
your WES'IERBEKE dealer for more information.
APPLY A THIN COAT OF CLEAN OIL TO THE O·RING WHEN
INSTALLING THIS KIT. THREAD THE KIT ON. THEN HAND
TIGHTEN AN ADDITIONAL 3/4 TORN AFTER THE O-RING
CONTACTS THE BASE.
NOTE: Westerbeke is not responsible for engine failure due to
incorrect installation of the Remote Oil Filter.
A CAUTION: It is vital to install the oil lines cor·
rectly. If the oil flows in the reverse direction, the by·
pass valve in the filter assembly will prevent the oil
from reaching the engine causing an intemal engine
failure. If there is no oil pressure readIng, shutdown
Immediately and check the ~!!!A~?:.ctiOJ1S.
FASTEN SECURELY TO A BULlrn""o ..
(SCREWS ARE OWNER .urrlltu, ., ....
THE IN CONNECTION HOSE
MUST ATTACH TO THE our
THE our CONNECTION unor""'~ ll'JIJ1j
MUST ATTACH TO THE IN
CONNECTION AT THE
REMOTE OIL FILTER.
>:;:::.. .... ___ C"O,iN;;Nn,,,EC,,TIDN AT THE
I, OIL FILTER.
Engines & Generators
18
APPLY A THIN COAT OF CLEAN OIL TO THE FILTER
GASKET WHEN iNSTALLING. AFTER THE FILTER
cqNTACTS THE BASE, TIGHTEN IT AN ADDITIONAL'