Technical data

STD. REPAIR SERVICE
VALUE LIMIT LIMIT
Ring width
Compression rings
W13 2. 5 mm
W21, W27, W33 - Nos. 2 & 3 2.0 mm
Oil ring 4.0 mm
Ring side clearance
Compression rings No. 1 0.66-0.11mm 0.3 mm
No. 2 0.05-0.09mm 0.2 mm
No. 3 0.04-0.08mm 0.2 mm
Oil ring 0.03-0.07mm 0.2 mm
Ring gap 0.15-0.40mm 1.5 mm
15. Connecting Rod
Type Forged I-beam
Bend and distortion within 0.15 mm
Big end thrust clearance 0.1-0.35mm 0.5 mm
16. Connecting Rod Bearing
Type Kelmet metal with back metal
Oil clearance 0.15 mm
Undersize 0.25, 0.50, 0.75 mm
17. Crankshaft
Type Fully counterbalanced
Bend 0.05 mm
End play 0.06-0.3mm
Journal O.D. W13 59 mm -0.95 mm
W21, W27 52mm -0.15mm -0.95 mm
W33 57mm
Pin O.D. W13, W21, W27 42mm
W33 48mm -0.15 mm -0.95 mm