Technical data
Rectifier Assembly
(+) Heatsink Assembly Test
Check for continuity
between the (+)
heatsink and stator
coil lead connection
terminal with an
ohm-meter. If there is
continuity in both
directions, the diode
is short circuited.
Replace the rectifier
assembly.
(-) Heatsink Assembly
Test
Check for continuity
between the (-) heatsink
and stator coil lead
connection terminal. If
there is continuity in both
directions, the diode is
shortcircuited.
Replace the rectifier
assembly.
Diode Trio Test
Using an ohm meter,
check the three diodes
for continuity in both
directions. If there is
either continuity or an
open circuit in both
directions, the diode is
defective.
Replace the rectifier
assembly.