Operator`s manual
Optional
Remote
Instrument
and Remote Start Panels
An
optional remote instrument panel
is
available, which includes starting controls. This panel also includes
a water temperature gauge, oil pressure gauge, battery voltmeter, operating hourmeter and start-stop con-
trol switches.
REMOTE
START PANEL
REMOTE
INSTRUMENT PRNEL
The remote instrument panel has with it
two
sending units
to
be installed on the engine block. One, a water
temperature sender and the other, an oil pressure sender. Plugged ports for each are located on the en-
gine. The water temperature sender
is
installed
in
the thermostat housing and the oil pressure sender
is
in-
stalled adjacent to the oil pressure switch. Use sealing compound on the threads
of
both senders when
installing. Electrical connections for each sender are tied off adjacent to each sender's location.
NOTE: The blue colored connection
is
for the oil pressure sender and the tan colored con-
nection
is
for the water temperature sender.
IWARNINGi
When installing the optional remote start panel or the optional remote instrument panel, it is
the installer's responsibility to comply with
U.S.
Coast Guard Standards 33
CFR
PART
183.
An
optional remote start panel
is
available for controlling the generator from a remote location.
Remote start panels include a green LED which lights when the engine runs at approximately
600 rpm. The
purpose
of
the
LED
is
to
alert the operator
to
release the starter toggle switch
in
addition
to
continue indicat-
ing that the generator set
is
running.
Westerbeke Generators
26