Operator`s manual

No-load Voltage
50 Hertz Plug
CAllI ION, DO NOI
ALLOW ANV OF TH~G~
PLUGS TO TOU~H THE
G~NERATOR·S HOUSING.
WINDINGS WILL DURN
IF THESE PLUGS TOUCH
THE HOUSING OR OTHER
WIRES.
BCG 4.5 kW GEHERATOR
A. Check the resistance of the exciter windings
4.5
't<W BCG: 1.9 ohm
C. Check the engine's speed.
60 hertz:
60.5 - 61.5
50 hertz: 50.5 - 51.5
THE _7 PLUG IS
SHOWN CONNECTED
TO THE CAPACITOR
ONLY FOR DEMON-
STRATION PURPOSES.
AC load Connection
Terlllinal Block
B. Check the capacitor.
Generator End
Cover Plate
4.S ~ BeG: 31.5 uF ± So
Adjust the engine's speed by use of the governor speed adjustment, page 67, to obtain the correct hertz.
NOTE: Refer to the "NOTE" at the bottom of page 54.
53
Westerbeke Generators