Operator`s manual

SYSTEM SPECIFICATIONS
FUEL SYSTEM:
GENERAL
FUEL
FUEL INJECTION
PUMP
FUEL INJECTION TIMING
NOZZLE
INJECTORS
FUEL PUMP
FUEL FIL TER( on engine)
AIR
CLEANER
AIRFLOW
COOLING SYSTEM:
GENERAL
OPERATING TEMPERATURE
FRESH WATER PUMP
SEA
WATER PUMP
SEAW
WATERFLOW, AT 1800 RPM
(measured before discharging into
exhaust elbow.)
SYSTEM CAPACITY(Fresh Water)
LUBRICATION SYSTEM:
GENERAL
OIL FILTER
SUMP CAPACITY
OPERATING OIL PRESSURE (engine hot)
OIL GRADE
Open flow, totally self-bleeding
No.2 Diesel oil (cetane rating of 45 or higher)
Nippon Denso (Bosch M type)
19° BIDC ±D.5 (static timing)
Throttle type
Pintle type
12-Volt DC; Electro-Magnetic type
Canister type, with replaceable element
Metal-screen type
32 cfm (.906 cmm)
Closed fresh water-cooled block, thermostatically
controlled with heat exchanger.
Centrifugal type, metal impeller, belt-driven
Positive displacement, rubber impeller, belt-driven
8.5 gpm (32.2Ipm)
5 quarts (4.73 liters)
Pressure type by Trichoid pump, gear driven with
e>.'lernal pressure relief valve
Full flow, paper element, spin-on type
3.3 quarts (3.12 liters)
40 - 80 psi (2.8 - 5.6 kg/cm
2
)
API specification CC or CD
15 WESTERBEKE GENERATORS