Integration Manual

DT50RF (5127)
Integration Manual
Michael Aeschbacher
Doc.-Name: DT50RF_Integrator_Manual.docx, V1.3, Doc.-No.: 5127.30.316
Document date: 2020-05-06 – printed versions are uncontrolled copies!
© Neratec Solutions AG, CH-8608 Bubikon, Company Confidential
Page 7 (7)
3.5 Professional Installation
This module is intended for professional installation.
3.6 Antennas
Regulatory Approval Conditions for using the module:
This device can be used with the following antennas
Type
Part number
Manufacturer
Gain
Chains
Dipole
F51-N
Tekfun
5GHz: 7.5dBi max
1, 2, 3
Patch
SPA-5600/40/14/0/V_2
Huber & Suhner
5GHz: 14dBi max
1, 2
Patch
SPA-5600/65/9/0/MIMO
Huber & Suhner
5GHz: 9dBi max
1, 2, 3
Shark
SPA-5600/45/12/10/V
Huber & Suhner
5GHz: 12dBi max
1, 2
Patch
SPA-5600/40/14/0/V_2 with
filter
Huber & Suhner
5GHz: 14dBi max
1, 2
3.7 Module Co-location
The antenna used with this module must not be co-located or transmit simultaneously with any other antenna or
transmitter, except in accordance with FCC multi transmitter product procedures. Co-location with one additional
DT50RF module is allowed.
3.8 Host product testing
Host products shall be tested according to FCC – Title 47 CFR Part 15 Subpart B.
To set module into test modes the Atheros Radio Test Tool shall be used. As the module shall be used only in
products developed and produced by Neratec, no instruction will be documented here. For more information
contact Michael Aeschbacher.