User's Guide

Ibex-RT-310 and Ibex-RT-320 Series User Guide
Westermo Network Technologies 8
2.3 Care Recommendations
Follow the care recommendations below to maintain full operation of the product and to fulfill the
warranty obligations:
 Do not drop, knock or shake the product. Rough handling above the specification may cause
damage to internal circuit boards.
 Use a dry or slightly water-damp cloth to clean the product. Do not use harsh chemicals, cleaning
solvents or strong detergents
.
 Do not paint the product. Paint can clog the product and prevent proper operation.
If the product is used in a manner not according to specification, the protection provided by the
equipment may be impaired.
If the product is not working properly, contact the place of purchase, nearest Westermo distributor
office or Westermo technical support.
NOTE
Devices not used shall be kept in the factory sealed moisture barrier bag. Open,
unsealed devices should not be kept unpowered for more than 30 days.
2.4 Product Disposal
This symbol means that the product shall not be treated as unsorted municipal waste when disposing
of it. It needs to be handed over to an applicable collection point for recycling electrical and
electronic equipment.
By ensuring the product is disposed of correctly, you will help to reduce hazardous substances and
prevent potential negative consequences to both environment and human health, which could be
caused by inappropriate disposal.
Figure 1 WEEE symbol for treatment of product disposal