User manual

BASIC SETTINGS AND TASKS

MY NET N900 CENTRAL ROUTER

USER MANUAL

Adding a Device

To connect a WPS-enabled wireless device, press the WPS button on the front of the router

or enter a PIN on the device’s Wi-Fi connection page. If the device is not capable of WPS,

you can still connect to the router using a network name and password.

To display the Add a Device screen:

1. Click the Add a Device icon.

Select one of the two listed options and follow the appropriate procedure below.

To connect a WPS-enabled device:

1. Click the Click here to connect using WPS link to display the screen shown below:

2. Select one of the two WPS methods:

a. Method 1: Press the WPS button on the front of the router or click the virtual button on this

screen. On your wireless device, press the physical

WPS button or click the virtual WPS

button.

b. Method 2: If prompted by your wireless device, enter the router’s WPS PIN shown on the

screen into your wireless device.

Note: The label on the bottom of the router displays the default PIN. You can

change the PIN on the Wi-Fi Protected Setup screen. (See “Advanced

Wireless Category” on page 41.) Once you change the PIN, the default

value is invalid unless you reset the router to default values.

3. Click Next.