Operation Manual

Connecting the Unit
WD ReadyView™ User Manual 8
b. Plug one end of the 6.5 ft Cat 5 cable into the network port on the NVR.
c. Plug the other end of the 6.5 ft Cat 5 cable into a port on the router.
d. Plug the power supply cable into the NVR.
2. Plug the power supply into an AC outlet.
Once the system is placed in a permanent location, an optional storage device (e.g. a WD My
Book™) can be connected to one of the USB ports on the back of the NVR. See the External
Storage section for more information.
Status Lights
Four (4) LED status lights are located on the top of the NVR. A description of each LED is listed
below.
33