User manual
Table Of Contents
- WD TV™ HD Media Player
- Table of Contents
- Important User Information
- Important Safety Instructions
- WD Technical Support
- Important: Should you encounter any problem, please do not return this product to the store before carefully reading the user manual. You can also find answers to your technical support questions through our knowledge base or e-mail support service a...
- Accessing Online Support
- Contacting WD Technical Support
- Recording your WD Product Information
- Registering your WD Product
- Accessories
- Product Overview
- Features and Functions
- Features
- Audio/Video Interface
- Multiformat Content Playback
- Multiformat is a file type that groups other files of the same digital content but may be encoded in different digital formats. For example, a single video file may actually include a few components such as video, audio, and photo grouped together. W...
- Plug-n-Play USB 2.0 Support*
- USB Storage File System Support
- Connections
- LED Indicators
- Remote Control
- Features
- Getting Started
- Operating the HD Media Player
- Watching Video
- Playing Music
- Viewing Photos
- Settings and Advanced Features
- Settings Navigation Buttons
- Audio/Video
- Music
- Movie
- Photo
- System
- Media Library
- A note about metadata
- Editing metadata
- Enabling/Disabling the Media Library
- Media Library Categories
- You can manually search for a media file by navigating to the specific media section and browsing through the available file folders. This method is recommended if there are only a limited number of files to search through. Otherwise, it is better to...
- Locating Media Content
- System Maintenance
- Appendix
- Index
WD TV HD Media Player
User Manual
SYSTEM MAINTENANCE – 63
Troubleshooting
Problem Solution
DISPLAY
The TV screen is blank and the HD
media player power LED remains off.
• Make sure the TV is turned on.
• Make sure that the power adapter and power outlet
are okay.
• Make sure that the interface cable is properly
attached to the correct terminals on both the TV
and the HD media player.
The TV screen is blank and the HD
media player power LED is blinking.
A system diagnostic failure occurred. Turn off your HD
media player, wait 10 minutes, then turn it on again. If
the same thing happens, contact the WD Technical
Support for assistance (see “WD Technical Support”
on page 2).
The TV screen is blank and the HD
media player power LED is on.
• Make sure the TV is turned on.
• Make sure that the interface cable is properly
attached to the correct terminals on both the TV
and the HD media player.
• Press the reset button for 10 seconds.
The TV screen is blinking and fuzzy. • Make sure that the interface cable is properly
attached to the correct terminal(s) on both the TV
and the HD media player.
• Make sure the HD media player power LED is on.
• If you are using a CRT TV, navigate to the Home |
Settings | System screen and:
- Make sure that the Composite option is
selected as the video output.
- Make sure the TV system setting matches the
system used in your region.
• If you are using an LCD TV, navigate to the Home |
Settings | System screen and:
- Make sure that the HDMI option is selected
as the video output.
- Make sure that the video resolution option is
set as Auto.
The video display is cut off or appears
in a sidebar.
Navigate to the Home | Settings | Audio/Video screen
and make sure that aspect ratio is set as Normal.
The slideshow pictures are distorted. Navigate to the Home | Settings | Photo screen and
select Keep as original or Fit to screen in the Photo
Scaling field.
FILES
File does not play. • Verify compatibility. Refer to “Supported formats”
on page 67.
• Run ArcSoft MediaConverter and convert the file.