User Guide

WESTERN DIGITAL EIDE HARD DRIVE
DATA LIFEGUARD TOOLS V11.0 - 13
INSTALLATION GUIDE
8. After Data Lifeguard Tools has completed formatting and partitioning the drive, the setup
summary screen outlines all of the steps completed. Click Done to close or exit.
9. Remove the Data Lifeguard Tools CD from the CD-ROM drive and choose from the
following options:
a) If your newly formatted drive is jumpered as Slave, you must change the setting to
Master and restart the computer. See page 5 for instructions.
b) If installing Windows, insert the Windows installation CD and restart the system.
Follow the on-screen instructions to install the operating system.
c) If an operating system has already been installed, restart the system.
10. This concludes the hard drive setup process. Your Western Digital hard drive is now ready
to use.
Note: Windows installation will inform you that there is an existing partition on the drive.
Since the drive has been previously set up using Data Lifeguard Tools, you can bypass this
function and proceed directly with Windows installation.