User manual

MANAGING STORAGE ON MY CLOUD MIRROR
61
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
Viewing the Current RAID Mode
Use the following steps to view the RAID mode currently used on your device.
1. On the navigation bar, click Storage to display the Storage screen.
2. Click RAID, if not already selected.
3. In the RAID Profile, the following information displays:

RAID Health

Auto-Rebuild status (whether or not Auto Rebuild is turned on)

RAID Volume shows how many volumes the RAID or JBOD is configured for.
Changing the RAID Mode
Use the following steps to change the current RAID mode on your My Cloud Mirror device.
1. On the navigation bar, click Storage to display the Storage screen.
2. Click RAID, if not already selected.
3. In the RAID Volume area at the bottom of the screen, click Change RAID Mode.
RAID 1(default) In RAID 1 mode, the RAID controller duplicates all data from one drive to a
second drive in the drive group. RAID 1 provides complete data
redundancy but cuts the required storage capacity in half.
WARNING! Changes made to your RAID mode will delete all of your data
and your user settings. See “Saving a Configuration File” on
page 94 for information on saving your user settings.
RAID Mode Description