User manual

MANAGING STORAGE ON MY CLOUD MIRROR
62
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
4. Review the Warning message and click OK.
5. Select the RAID mode you’d like to use for your My Cloud Mirror device.
RAID Modes include:
6. Select the Switch to <RAID Mode> check box and click Next.
7. Review the status of your hard drives and click Next.
JBOD The use of one or more drives not in a RAID configuration but
managed as separate logical volumes.
Spanning Combination of drives in a linear fashion to create one large
logical volume.
RAID 0 Data is striped across multiple hard drives, enabling
accelerated reading and recording of data by combining the
work of two or more drives to increase performance.
RAID 1 (default) Two instantaneous copies of the data are recorded on
separate hard drives so if one of them fails, other(s) continue
to read/write data until the faulty hard drive is replaced.