User manual

MANAGING STORAGE ON MY CLOUD MIRROR
65
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
Disk Status
The Disk Status screen identifies the health of the disk drives as well as the status and
information on each drive used in your My Cloud Mirror device. The Disk Status screen
consists of the following areas:

Disks Profile: This area displays the general status of all of the disk drives on your
device.

System Disks: This area identifies the drives on your device, the status of each
drive, and the amount of space on that drive.
Note: If a drive is not supported, the status is not compatible.
Viewing Hard Drive Information
Use the following steps to view status of the disks on your My Cloud Mirror device.
1. On the Storage page, click Disk Status, if not already selected.
2. Select Drive <drive #> next to the disk for which you’d like to view information.
3. The Hard Drive Information screen displays the following data.
Hard drive information definitions.
Vendor The vendor from whom the hard drive was obtained.
Model The model number of the hard drive selected.
Serial Number The serial number of the hard drive selected.
Capacity The capacity of the hard drive selected.
Firmware Version The current firmware version used on the drive selected.