User manual

CONFIGURING SETTINGS
94
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
Saving a Configuration File
Use the following steps to save a configuration file.
1. In the System Configuration area, click Save Config File.
2. The configuration file saves to your desktop.
Importing a Configuration File
Use the following steps to save a configuration file.
1. In the System Configuration area, click Import File.
2. Navigate to the location of your saved configuration file and select it. The configuration
file is loaded. The device reboots. Don’t unplug the device during this rebooting
process. Once the reboot is complete, launch the dashboard.
Device Maintenance
The Device Maintenance area allows you to shut down and reboot your My Cloud Mirror
device. This area also displays the amount of time the device has been up and running.
Shutting down the Device
Use the following steps to safely shut down your My Cloud Mirror device.
1. In the Device Maintenance area, click Shutdown.
2. Review the confirmation message and then click OK. Your My Cloud Mirror safely shuts
down.
Rebooting the Device
1. In the Device Maintenance area, click Reboot.
2. Review the confirmation message and then click OK. Your My Cloud Mirror safely
reboots.
Scan Disk
The Scan Disk area allows you to scan your device’s hard disks for any errors.
Scanning Your Disk
Use the following steps to run a disk scan on your My Cloud Mirror device.
1. In the Scan Disk area, select the volume you’d like to scan from the drop-down menu.
2. Click Scan Disk.