Product Manual

. MACHINE
COMPONENTS
The TransCube is a double-walled
tank for holding, transferring or
transport ing fuel. The fuel tank
mounts inside the outer tank. The
Tran sCub e is desi g ned so t he o ut er
tank is large enough to hold all
the uid should the inner fuel t ank
break, crack or leak capacity
in the interstice .
Close and lock the lid when trans -
porting or not using the tank. The
inch ll plug is located on the inner
tank along with the psi fusible plug
for venting. A fuel gauge is mounted
next to the ll plug to assist in lling
the tank.
An elect ric pump, hose and hand-
held no le are used to t ransfer fuel
and the no le hooks to the side
frame. ower must be supplied by
the customer to power the pump.
Output and return line with valves
can be connected to an engine
operat ing at a remote locat ion.
The outer tank is designed with an
access hole for routing fuel lines if
required for your application.
An optional volume meter can be
mounted under the lid to measure
the amount of fuel being dispensed.
TDG placards are locat ed on each
side of the tank.
A Outer Tan
with removable lid
Inner Tan
C Hatch Lid
D Filler Cap 3
E Fuel Gau e
F Electric Pump
G Pump ON OF
H Fuel Feed Line Valve
Fuel Ret urn Line Valve
Re f u e l i n Hose
L Nozzle
M Nozzle Stora e rac et
N Manhole Cover
O Relief Vent
P Optional Fuel Meter
TDG Placards
R Power Cord
S Tie down point
T Stac in rac ets
W Fuel Line Access Slots
Lif t in brac et
Fi . PRI NCIPLE COM PONENTS
P
E
O
H
W
W
R
M
L
F
G
W
W
C
H
O
E
L
D
D
M
FR
G
C
T
S
A
S
W
W
NT
A
W
N
C
S
T
C
N
X
X