Product Manual

20
6. Generator Standby:
The TransCube is designed to be used to
provide fuel to generator sets or any other
power unit requiring fuel.
Follow this procedure when connecting as
a fuel supply to an engine:
a. Place TransCube in a level area adja-
cent to the engine requiring fuel.
b. Install quick couplers into the tank
outlets appropriate for your application.
The feed or return ports are marked
with directional arrows.
Fig. 10 FUEL LINES
Fig. 11 SUPPLY FUEL
c. Use connector components with NPT
threads.
d. Thread the power unit fuel line hoses
through the access slots on each side
of the frame.
e. Connect to the quick couplers on the
tank outlets.
NOTE
Use teflon tape on the
threads to prevent leaking at
the connection.
f. Open tank valves and
start engine.
g.
Close and lock lid to pre-
vent anyone from tamper-
ing with the fueling equip-
ment.
h. Check the fuel gauge and
refill the tank when re-
quired to prevent running
out.
i. Turn valves off, discon-
nect power, disconnect
couplers, and lock lid
when TransCube is not
being used.
IMPORTANT
It is recommended that a
fuel filter be installed in
the intake line to re-
move any contaminants
from the system prior to
entering the engine fuel
system.
Slots
Valves