Product Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CABINET OVERVIEW
- CENTRE OF GRAVITY
- LIFTING & HANDLING
- FILLING THE TCG
- DISPENSING FUEL
- TRANSPORTING
- MARKINGS
- STACKING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- STATUTORY INSPECTION AND MAINTENANCE
- INNER TANK REMOVAL
- ENVIRONMENTAL RESPONSIBILITY
- TROUBLE-SHOOTING
- WARRANTY
WM002-NA 40, 50TCG(G)-EN Revision 1
12
ACCESS AND SECURITY
SAFETY. Ingress to the inner tank must only be carried out by
trained personnel and after a full risk assessment has been carried
out.
Access to the inner tank
For maintenance, inspection and cleaning, access can be made through the
installed access lid located on the top of the tank.
1. Access Lid
2. Cabinet hatch
Access to the Cab Area
• The cabinet hatch is constructed of a heavy-duty steel, care should be
taken when opening or closing
• The cabinet hatch should be kept closed when the TCG is not being used
to protect the fittings and containment area from weather conditions.
Security
• The TCG is fitted with a range of connections to enable the supply of
Flammable & Combustible fluids. All the connections are housed
behind the cabinet hatch, which can be locked using a suitable security
padlock