Product Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CABINET OVERVIEW
- CENTRE OF GRAVITY
- LIFTING & HANDLING
- FILLING THE TCG
- DISPENSING FUEL
- TRANSPORTING
- MARKINGS
- STACKING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- STATUTORY INSPECTION AND MAINTENANCE
- INNER TANK REMOVAL
- ENVIRONMENTAL RESPONSIBILITY
- TROUBLE-SHOOTING
- WARRANTY
WM002-NA 40, 50TCG(G)-EN Revision 1
20
The baffle plates run the width of the unit and are only effective if the tank
is loaded correctly onto the trailer, truck etc. NOTE: always load the tank as
shown below with the cabinet running in the direction of travel.
When transporting ALL ports, valves, vents and openings must be
closed
MARKINGS
For compliance to the Transportation of Dangerous Goods Act and
regulations, and to comply to the National Fire Protection Association,
necessary UN # CLASS-3 Diamond Placards and NFPA "hazard diamond"
must be displayed. These markings convey health warning information to
emergency response teams.
STACKING
• The TCG is designed with the structural strength to allow stacking
2 high when full and 3 high when empty.
• Always mate the corner brackets together to stabilise the stack.
• Use only a hoist or forklift with the required lift capacity to raise,
lower or stack the tanks.
Stacking Arrangement