Product Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CABINET OVERVIEW
- CENTRE OF GRAVITY
- LIFTING & HANDLING
- FILLING THE TCG
- DISPENSING FUEL
- TRANSPORTING
- MARKINGS
- STACKING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- STATUTORY INSPECTION AND MAINTENANCE
- INNER TANK REMOVAL
- ENVIRONMENTAL RESPONSIBILITY
- TROUBLE-SHOOTING
- WARRANTY
WM002-NA 40, 50TCG(G)-EN Revision 1
24
STATUTORY INSPECTION AND MAINTENANCE
To retain the UN IBC approval
4
, it is required that the owner of the TCG carries
out regular inspections and ensures that a record of each inspection is kept.
Where fault is found, the unit MUST be removed from service until the fault
is rectified and the unit is retested successfully.
Every 2 ½ years
• External inspection
• Function of all services equipment
• Leak test.
Every 5 years
• Internal inspection
• External inspection
• Function of all services equipment
• Leak test.
NOTE: The 2 ½ and 5-year Inspection must be carried out by
a competent person
4
For Canada – Transport Canada approved and Registered testing facility
with valid certification under CAN/CGSB43.146-2016.