Product Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CABINET OVERVIEW
- CENTRE OF GRAVITY
- LIFTING & HANDLING
- FILLING THE TCG
- DISPENSING FUEL
- TRANSPORTING
- MARKINGS
- STACKING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- STATUTORY INSPECTION AND MAINTENANCE
- INNER TANK REMOVAL
- ENVIRONMENTAL RESPONSIBILITY
- TROUBLE-SHOOTING
- WARRANTY
WM002-NA 40, 50TCG(G)-EN Revision 1
26
INNER TANK REMOVAL
For periodic inspection you may be required to remove the inner tank from
the containment. Follow local Health and Safety rules when carrying out
this operation.
IMPORTANT - Ensure the tank is empty before lifting.
1. Remove all 4 corner
brackets. Store brackets,
nuts and bolts safely
2. Remove 2 x side and 2 x
end rails. Store rails, nuts
and bolts safely
3. Insert 4 x M22 lifting eyes
in each corner of the
inner tank