Product Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CABINET OVERVIEW
- CENTRE OF GRAVITY
- LIFTING & HANDLING
- FILLING THE TCG
- DISPENSING FUEL
- TRANSPORTING
- MARKINGS
- STACKING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- STATUTORY INSPECTION AND MAINTENANCE
- INNER TANK REMOVAL
- ENVIRONMENTAL RESPONSIBILITY
- TROUBLE-SHOOTING
- WARRANTY
WM002-NA 40, 50TCG(G)-EN Revision 1
28
TORQUE SETTINGS
Nuts and Bolts
If the tank is required to be dismantled and re-assembled the tank nuts
and bolts used are required to be torqued, torque settings are shown in
the table below.
Metric Torque Specifications
Size
Typical Maximum Tightening Torque Nm (lb ft)
Property Class
Grade 8.8
Grade 10.9
M8 30 (21) 40 (30)
M10 55 (42) 75 (60)
M12 100 (74) 135 (106)
Torque figures indicated above are valid for lightly oiled threads.
Therefore, do not grease or oil bolts or cap screws unless otherwise
specified.
Torque value for bolts and cap screws are identified by their head markings
(property class).