Product Manual A
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CENTRE OF GRAVITY
- CAB OVERVIEW (Standard Unit)
- LIFTING
- FILLING THE FCP
- DISPENSING FUEL
- TRANSPORTING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- RECOMMENDED INSPECTION - MAINTENANCE
- ENVIRONMENTAL RESPONSIBILITY
- SPILLS
- CONTAINMENT
- DISPOSAL
- TROUBLE SHOOTING
- WARRANTY
WM006 FCP250-500-1000-EN Revision 1 - Sep 2019
19
LIFTING
Always prepare a lifting plan.
LIFT EMPTY ONLY
By Forklift / Tele-handler
• Each FCP is fitted with forklift pockets which are designed to allow the
FCP to be raised by a forklift/tele-handler. The FCP can be lifted from
all 4 sides. This must be considered in your risk assessment
• It is important that the total gross weight of the FCP is not more than
half (50%) of the forklift’s maximum SWL. Ensure that the forklift’s
forks are set to the correct width for the FCP’s fork pockets
1. Fork Pockets