Product Manual B
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CENTRE OF GRAVITY
- CAB OVERVIEW (Standard Unit)
- LIFTING
- FILLING THE FCP
- DISPENSING FUEL
- TRANSPORTING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- RECOMMENDED INSPECTION - MAINTENANCE
- ENVIRONMENTAL RESPONSIBILITY
- SPILLS
- CONTAINMENT
- DISPOSAL
- TROUBLE SHOOTING
- WARRANTY
WM006 FCP250-500-1000-EN Revision 1 - Sep 2019
28
INNER TANK REMOVAL
For periodic inspection and maintenance, you may be required to remove
the inner tank from the outer tank. Follow local Health and Safety rules
when carrying out this operation.
IMPORTANT - Ensure the tank is empty before lifting.
1. Remove all 4 corner
brackets. Store brackets,
nuts and bolts safely
2. Remove 2 x side and 2 x
end rails. Store rails, nuts
and bolts safely
3. Insert 4 x M22 lifting eyes
in each corner of the
inner tank