Product Manual B
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CENTRE OF GRAVITY
- CAB OVERVIEW (Standard Unit)
- LIFTING
- FILLING THE FCP
- DISPENSING FUEL
- TRANSPORTING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- RECOMMENDED INSPECTION - MAINTENANCE
- ENVIRONMENTAL RESPONSIBILITY
- SPILLS
- CONTAINMENT
- DISPOSAL
- TROUBLE SHOOTING
- WARRANTY
WM006 FCP250-500-1000-EN Revision 1 - Sep 2019
34
SPILLS
Should a spill occur when emptying the containment, or when filling or
transferring fuel, clear the spill as quickly as possible using absorbent material.
Ideally, you should use a dedicated spill kit which will contain all the necessary
items to retain and remove such a spill.
• DO NOT hose the area down or use any detergents
• DO NOT allow the fuel to enter drains or watercourses
• Spills must be reported to your local Authority
• All material used to retain and remove a spill should be bagged and
collected by a registered carrier
CONTAINMENT
The FCP containment area safeguards against any spill exiting the unit and
polluting the immediate area. The containment is designed to retain up to
110% of the unit’s primary tank maximum storage capability.
• Check regularly for liquid in the containment
• Remove any water
• Take immediate remedial action if product or water is found
IMPORTANT
Waste may only be collected by a registered carrier.
DISPOSAL
When maintaining, servicing or disposing of the FCP or consumable
components, do not dispose of contaminated parts within general refuse.
Refer to local authority regulations for their correct disposal.