Product Manual B
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- IDENTIFICATION MARKS
- SIGN-OFF FORM
- UNIT SPECIFICATION
- SAFETY
- ACCESS AND SECURITY
- CENTRE OF GRAVITY
- CAB OVERVIEW (Standard Unit)
- LIFTING
- FILLING THE FCP
- DISPENSING FUEL
- TRANSPORTING
- STRAPPING CHARTS
- MAINTENANCE AND SERVICE SCHEDULE
- RECOMMENDED INSPECTION - MAINTENANCE
- ENVIRONMENTAL RESPONSIBILITY
- SPILLS
- CONTAINMENT
- DISPOSAL
- TROUBLE SHOOTING
- WARRANTY
WM006 FCP250-500-1000-EN Revision 1 - Sep 2019
35
TROUBLE SHOOTING
The Transcube is a simple and reliable system
Below we have listed common problems, causes and solutions that you
may encounter.
If a problem is difficult to solve, even after having read through this trouble
shooting section, please call your local Western Global distributor or
dealer.
Before you call, please have the tanks Identification
Marks ready (Serial
and Tank numbers)
PROBLEM
CAUSE
SOLUTION
Pump will not run
No Power
Connect power wires to
correct power source
Pump Off
Turn pump on
Fuel in containment
Loose fitting
Tighten fitting
Leaking Coupler
Replace coupler
Over filling
Watch fuel gauge when filling.
Do not fill past 95% of the
nominal capacity
Water in containment
Lid left open to
weather
Remove water.
Keep lid closed
6
6
Always read the manufacture’s manual