Product Manual B
WM006 FCP250, 500, 1000, 1800 V1 EN Feb 2020
19
DISPENSING FUEL
There are two options available for dispensing/supplying fuel. Either manually via
a fuel pump and nozzle or by direct coupling to the equipment such as a generator.
• By Fuel Pump - For the information about any pump system fitted to this FCP,
please refer to documents supplied with the pump.
• Direct Coupling - enables continuous fuel feed to equipment such as
generators where fuel is required continuously.
TRANSPORTING
NOTE: TRANSPORT EMPTY ONLY
• In transport ALL ports, valves and vents must be closed
• Ensure pump is turned off
• Close and lock the access lid
• The FCP must be secured firmly to its means of transport
• The FCP is designed with the structural strength to allow stacking 2 high
when empty.
• Always mate the corner brackets together to stabilise the stack.
• Use only a hoist or forklift with the required lift capacity to raise, lower or
stack the tanks.
STACKING
• The FCP is designed with the structural strength to allow stacking 2 high
when full and 3 high when empty.
• Always mate the corner brackets together to stabilise the stack.
• Use only a hoist or forklift with the required lift capacity to raise, lower or
stack the tanks.
Stacking Arrangement