Switch User Manual

5-9
Basic Configuration
In the Text Interface, the Invalid Access Lockout configuration menu is accessed via the
System Parameters menu. In the Web Browser Interface, the Invalid Access Lockout
configuration is accessed via the "General Parameters" link. The Invalid Access Lockout
configuration menus allow you to select the following:
• LockoutEnable: Enables/Disables the Invalid Access Lockout feature.
(Default = On.)
• LockoutAttempts: The number of invalid attempts required in order to activate the
Invalid Access Lockout feature. (Default = 9.)
• LockoutDuration: The length of time that logical network ports will remain locked
when an Invalid Access Lockout occurs. If the duration is set at "Infinite", then ports
will remained locked until the /UL command is issued. (Default = 30 Minutes.)
5.3.3. Log Configuration
This feature allows you to create records of command activity, alarm actions and
temperature readings for the AFS-16 unit. The Log features are enabled and configured
via the System Parameters Menus.
The AFS-16 features three different event logs: the Audit Log, the Alarm Log and the
Temperature Log:
• AuditLog: The Audit log creates a record of all switching activity at the AFS-16
unit, including A/B switching that was initiated by the Ping No Answer feature and
the Input Monitor Alarm. In addition, the Audit Log also includes login/logout
records for all users. Each Log record includes a description of the activity that
caused the A/B switching, the username for the account that initiated the action and
the time date that each event occurred.
• AlarmLog: The Alarm log creates a record of all Alarm Activity at the AFS-16
unit. Each time that an alarm is triggered or cleared, the AFS-16 will generate a
record that lists the time and date of the alarm, the name of the Alarm triggered, a
description of the Alarm and the time and date that the Alarm was cleared.
• TemperatureLog: The Temperature Log provides a record of ambient rack
temperature levels over time at the AFS-16 unit. Each Log record will include the
time and date, and the temperature reading.