Switch User Manual

5-18
Basic Configuration
• CircuitAccess: Determines which AFS-16 Circuit Modules this account will be
allowed to access. (Defaults; Administrator & SuperUser = All Circuit Modules On,
User and ViewOnly = All Circuit Modules Off.)
Notes:
• IntheTextInterface,CircuitAccessisconfiguredbyselectingitem4and
thenselectingthedesiredportsfromtheresultingsubmenu.
• IntheWebBrowserInterface,CircuitAccessisconfiguredbyclickingonthe
"plus"symboltodisplaythedropdownmenu,andthenselectingthedesired
CircuitModulesfromthedropdownmenu.
• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall
CircuitModules.
• ViewOnlyaccountsareallowedtodisplaythestatusofCircuitModules,
butarelimitedtotheCircuitModulesspecifiedbytheaccount.ViewOnly
accountsarenotallowedtoinvokeA/BSwitchingcommands.
• CircuitGroupAccess: Determines which Circuit Groups this account will be
allowed to control. Circuit Groups allow you to define a selection of Circuit
Modules, and then quickly assign that group of circuits to accounts. For more
information on Circuit Groups, please refer to Section 5.7. (Default = All Circuit
Groups Off.)
Notes:
• Inordertousethisfeature,CircuitGroupsmustfirstbedefinedasdescribed
inSection5.7.
• IntheTextInterface,CircuitGroupAccessisconfiguredbyselectingitem5
andthenselectingthedesiredCircuitGroup(s)fromtheresultingsubmenu.
• IntheWebBrowserInterface,CircuitGroupAccessisconfiguredbyclicking
onthe"plus"symboltodisplaythedropdownmenu,andthenselectingthe
desiredCircuitGroup(s)fromthedropdownmenu.
• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall
CircuitGroups.
• ViewOnlyaccountsareallowedtodisplaythestatusofCircuitGroups,
butarelimitedtotheCircuitGroupsspecifiedbytheaccount.ViewOnly
accountsarenotallowedtoinvokeA/Bswitchingcommands.
• ServiceAccess: Determines whether this account will be able to access command
mode via Serial Port (RS232 Port), Telnet/SSH or Web and whether the account will
have access to the Outbound Telnet feature. For example, if Telnet/SSH Access
is disabled for this account, then this account will not be able to access command
mode via Telnet or SSH. (Default = Serial Port = On, Telnet/SSH = On, Web = On,
Outbound Access = Off.)