User`s guide

2.3. The Circuit Module

The AFS-16 can accept up to sixteen Circuit Modules. Each

Circuit Module includes a common jack, jacks for "A" and "B"

paths, and a Manual A/B switch.

A/B Switch: Each A/B Switch can be manually switched,

or activated by commands sent to the Control Module. The

A/B Switch can also be operated by the Control Module's

Master A/B Switch.

"A" Connector

"C" Connector: For connection to a common line.

"B" Connector

A/B Switch Jumper: (Not Shown) Jumper J1, located on

the Circuit Module board, is used to enable/disable the

individual Circuit Module's response to the Master A/B

Gang Switch (Section 3.4).