User`s guide

5.4. The Status Screen
The Status Screen, shown in Figure 5.2, lists the current status of
all AFS-16 Circuit Modules. To display the Status Screen, type
]S [Enter]. The Status Screen fields indicate the following:
·
FROM: The user-defined name for the "C" (Common) jack
for each Circuit Module.
·
TO: The user-defined name for the selected A/B Jack.
·
POS: The currently selected A/B Jack.
·
MON: Indicates if the Monitor Mode is active for each
Circuit Module. An "*" (asterisk) indicates that the Monitor
Mode has detected a critical signal condition and has
initiated the switch/notify routine.
·
TYPE: Indicates the type of Circuit Module installed at
each position. Dashes indicate that no card is present for
that position.