Specifications

Printing
Western Telematic
Switchbox - 81c - Dip
Switches
Western Telematic
Switchbox - 161a - Dip
Switches
Western Telematic
Switch Box Printer
Assignments
Western Telematic
Switchbox - 41, 41a
Cable Configuration
Western Telematic
Switchbox - 161a Cable
Configuration
Western Telematic
Switchbox - 81c - 9 Pin
Cable Configuration
Western Telematic
Switchbox - 81c - 25 Pin
Cable Configuration
Setup for Sato 8400/6
and 8400/8
Setup for Sato 8400,
8400RV and 8450
Setup for Sato CL608
and 8480s
Setup for Sato CL612
Setup for Sato CL408
and CL412
Parallel Printing Internal Time Stamp Multi-Buffer
9 Pin Cable Configuration
25 Pin Cable Configuration
Bidirectional - 9 Pin Cable Configuration
In order to support the Cancel command from the Sato printer, the software must
be configured for Bidirectional printing. Configuration for bidirectional printing is
done as follows:
• Select Bidirectional in the printer setup.
• You must have a Bidirectional cable attached.
• The printer protocol must be set for Status 2 or 4
In order for the Cancel command to properly function, the following should be
noted:
• Jobs in the Print Queue, which have a graphic, must be in a Frozen
Status. Then, subsequent jobs will need to be Unfrozen as needed.
• Jobs in the print queue, which do not have a graphic, can be in a Frozen or
Unfrozen state.
227