Specifications

Printed Documentation
184
Enter the type of device that is attached to the port. The choices are Printer,
Western Telematic 4-way Switch, 8-way Switch, or 16-way Switch.
Printer Address
Printer AddressPrinter Address
Printer Address
When configuring a printer that is attached to a Western Telematic Switch Box,
enter the number on the switch box that the printer is connected to.
Direct Print
Direct PrintDirect Print
Direct Print
Select direct print to send data directly to the port. For a shared or network printer,
be sure direct print is not selected. This option appears for those printers that can
be configured for parallel printing. This option only appears when using Windows
95, 98, or ME.
Printer Memory
Printer MemoryPrinter Memory
Printer Memory
If a memory cartridge is installed, select the option corresponding to the memory
module that is inserted into the top cartridge slot. A memory module is required in
the Prodigy and Prodigy Plus printers to store picture information and TrueType
fonts. If the memory module is not present, the printer will still work, but any
graphic that is downloaded, will not be printed.
Cutter
CutterCutter
Cutter
Select Cutter Installed or Not Installed to designate cutter availability. While
designing the format, if a cutter is indicated as being installed on the printer you
may choose:
• Do not cut
• Cut after each Format
• Cut after each Batch
• Cut after each Job
Darkness Adjustment
Darkness AdjustmentDarkness Adjustment
Darkness Adjustment
Enter a number from -3 to +3 to adjust the base level of print darkness. Negative
numbers make the print lighter.
Offset Adjustment
Offset AdjustmentOffset Adjustment
Offset Adjustment
Enter a number from -99 to 999 to adjust the form edge offset. This allows you to
compensate for slight mechanical differences between printers. This may also be
accomplished with settings on the printer's front panel.
Initial Label Feed
Initial Label FeedInitial Label Feed
Initial Label Feed