Specifications

Printing
229
Bidirectional: 25
Bidirectional: 25Bidirectional: 25
Bidirectional: 25-
--
-25 Pin Cable Configuration
25 Pin Cable Configuration25 Pin Cable Configuration
25 Pin Cable Configuration
In order to support the Cancel command from the Sato printer, the software must
be configured for Bidirectional printing. Configuration for bidirectional printing is
done as follows:
• Select Bidirectional in the printer setup.
• You must have a Bidirectional cable attached.
• The printer protocol must be set for Status 2 or 4
In order for the Cancel command to properly function, the following should be
noted:
• Jobs in the Print Queue, which have a graphic, must be in a Frozen Status.
Then, subsequent jobs will need to be Unfrozen as needed.
• Jobs in the print queue, which do not have a graphic, can be in a Frozen or
Unfrozen state.
25 Pin on PC
25 Pin on PC 25 Pin on PC
25 Pin on PC 25 Pin on Printer
25 Pin on Printer25 Pin on Printer
25 Pin on Printer