Specifications

Appendices
417
If you have an existing .lcm file simply click File from the main menu and then
click on Open. You can then browse for your .lcm, once you have selected the
file, click on Open to load it.
Once an .lcm is opened you can view any section of the configuration by
selecting Configure from the main menu and then clicking on the section you
want to change (see section 2. Setup for more information)
To create a new .lcm file, click File
FileFile
File from the main menu and then click on
New
NewNew
New. You will then be prompted through creating a configuration. What follows is
a list of the items you may be prompted for during the configuration:
Data Source...
Data Source...Data Source...
Data Source...
Select “Serial Port (COMx)” if you are receiving data from a Serial
device.
Select “TCP/IP Port (Network)” if you want LABELCOM to monitor a
TCP/IP port for data.
Select “Data File” if you want LABELCOM to monitor a file for data.
Select “USB HID or Keyboard Wedge Device” if LABELCOM will be
receiving data from a USB Human Interface Device or a Keyboard
Wedge Device.
Port Name:
Port Name:Port Name:
Port Name: Designates the name of the Com port that LABELCOM is
configured for. This is the port that the data will be read from.
Baud Rate
Baud RateBaud Rate
Baud Rate: Select the baud rate of the input device. This selection must
match the baud rate that the input device is configured for.
Data Bits
Data BitsData Bits
Data Bits: Select a value for Data Bits. Choose a number from 4 to 8. This
selection must match the number of Data Bits your input device is
configured for.
Stop Bits:
Stop Bits:Stop Bits:
Stop Bits: Select a value for Stop Bits. Choose 1, 1.5 or 2. This selection
must match the Stop Bits your input device is configured for.
Parity:
Parity:Parity:
Parity: Select a value for Parity from the list. Choices are: None, Odd, Even,
Mark, and Space. This selection must match the Parity your input device is
configured for.
Flow Control:
Flow Control:Flow Control:
Flow Control: Select the method for input flow control. Choose None if
unknown. Choices are: None, XON/XOFF, DTR, RTS