User`s guide

Â
Power Switch
Ã
RS232 PORTS: For connection to console ports on target
devices. Standard DB9 connectors configured as DTE
ports. The RS232 ports are similar to a serial port on a PC.
When connecting a modem, use a standard serial cable.
When connecting a PC or other DTE device use a null
modem cable.
·
Ports 1 and 2 are System Setup Ports. Note that
Supervisor Level command access cannot be disabled at
these ports.
·
Ports 1 and 2 can either be connected to a PC or modem.
Connection to a modem allows control by a remote PC.
Ä
Option/SetUp Switches: A bank of eight DIP switches,
which set the default baud rate, handshake, message type,
and duplex mode. Switch functions are described in detail
in Section 4.2.
2-3
Unit Description