User`s guide

5-44
PollCat NetLink II - User’s Guide
5. Audit Trail: Enables/Disables the Audit Trail function for the Server
feature, and determines whether or not log entries will be sent to the
SYSLOG IP Address (defined via the Network Port Configuration
menu.) When enabled, the NetLink II will log all file transfer activity
at the Server. For more information on the Audit Trail function, please
refer to Section 16.1.6. The Audit Trail function offers the following
options: (Default = Off.)
1. Record with SYSLOG: Enables the Audit Trail function, and
sends log entries to the user-defined SYSLOG IP Address. Note
that in order for this option to work, the SYSLOG IP Address
must be defined.
2. Record without SYSLOG: Enables the Audit Trail function, but
does not send out log entries via SYSLOG.
3. Off: Disables the Audit Trail Function.
6. FTP Enable: Enables/Disables the NetLink II's FTP server. Note
that this feature must be enabled in order for the FTP server to work.
(Default = Off.)
7. SFTP Enable: Enables/Disables the NetLink II's SFTP server. Note
that this feature must be enabled in order for the SFTP server to work.
(Default = Off.)
Miscellaneous:
11. Stop FTP Session: Stops any FTP session that is currently in
progress.
12. Stop SFTP Session: Stops any SFTP session that is currently in
progress.