User`s guide

^B19 Display Schedule
Displays the current Callback Schedule (defined using Command ^B12). Type ^B19 [Enter].
^B20 Display Number of Stored Data Records or Blocks
Displays the number of records (ASCII Record Mode) or blocks (Binary Block Mode) stored in
the current memory partition.
Command Options:
^B20 Display the total count of both Data and Alarm Records or blocks in the
current memory partition.
^B20,D Display the count of Data Records or blocks in the current memory partition.
^B20,A Display the count of Alarm Records or blocks in the current memory partition.
^B21 Display Remaining Memory Space
Displays the amount of PollCat III memory (in characters/bytes) that is currently available.
Type ^B21 [Enter].
^B22 Display Memory Size /
PBX Port Baud Rate
Displays PollCat III's total memory capacity and current PBX Port baud rate settings.
Type ^B22 [Enter].
^B23 Display Battery Status
Displays the status of PollCat III's internal lithium battery as listed in the response table below.
Type ^B23 [Enter].
Verbose Response Terse Response
BATTERY GOOD ACK
BATTERY LOW NAK
^B24 Display Set-Up Switch Status
Displays the configuration of PollCat III's Set-Up Switches. Type ^B24 [Enter].
10-11
PollCat III - Pollable Call Accounting Terminal, User's Guide Command Reference Guide