User guide

T R A F F I C A N A L Y S T A D M I N I S T R A T I V E G U I D E
J U N E 20 11 I M P A C T T E C H N O L O G I E S , I N C 51
C O N F I D E N T I A L A N D P R O P R I E T A R Y
In the bottom section, browse to the location of the Switch Configuration File. This file is
created by the HiPath Manager and is an ascii.txt file format. It tells Traffic Analyst which
phones are TDM or IP. Normally, you will only need to create this file once; thereafter, you
will only create a new version of the file if your switch configuration changes.
To create this file in your HiPath Manager software, select “Program options.” On the
General screen, check the ASCII file option under Save options. Make sure the path
location is the same as the prn file (generated in the previous step) and the kds file. The
file will be named according to the database name. For example, if the database file is
3000.kds, then the ASCII file will be named 3000.ASCII.txt or just 3000.txt.
Click on “Save customer database” and then “Close customer database.” This will create
the Switch Configuration file.
An example of the HiPath Manager screen where you perform these options is below.
Note that this screen may vary somewhat depending on the version of your HiPath
Manager software.