User`s guide

Apx-11
G. ^Bxx Command Summary
Cmd. Description / Options
^B00 Set/Reset Memory Partition ^B00[,type][,source] or ^B00,R
Where:
[,type] Data Type: Offers the following options:
,A1 Include Records that Match Alarm Filter 1 (or)
,A Include Records that Match Alarm Filter 1
,A2 Include Records that Match Alarm Filter 2
,ALM Include All Alarm Records from both Filters
,STD Include Non-Alarm (Standard) Records (or)
,D Include Non-Alarm (Standard) Records
[,source] Source Port: Offers the following options:
,PA Include Records Received via PBX Port A
,PB Include Records Received via PBX Port B
(Not Available on NLJ-VIP Models.)
,PX Include Records Received via the AUX Port
(Not Available on NLJ-VIP Models.)
,PI Include Records Received via PBX IP Port.
,R Release Current Partition: This argument cannot be combined
with the [,type] or [,source] arguments.
^B01 Enter Data Read Mode
^B01[,type][,source][@n][,n]
Where:
[,type] Data Type: Offers the following options:
,A1 Release Records for Alarm Filter 1 Only (or)
,A Release Records for Alarm Filter 1 Only
,A2 Release Records for Alarm Filter 2 Only
,ALM Release All Alarm Records from both Filters
,STD Release Non-Alarm Records Only (or)
,D Release Non-Alarm Records Only
,"clue" Release Alarm Records for "clue" Only
[,source] Source Port: Offers the following options:
,PA Release Records Received via PBX Port A.
,PB Release Records Received via PBX Port B.
(Not Available on NLJ-VIP Models.)
,PX Release Records Received via the AUX Port.
(Not Available on NLJ-VIP Models.)
,PI Release Records Received via PBX IP Port.
[@n] Offset: Release records starting with the "nth" record.
[,n] Count: Release records in groups of "n".
^B02 Send Next Data
^B03 Display Site ID
^B04 Define Site ID ^B04,site_id Where "site_id" is the desired Site I.D. Message
(Up to 32 Characters)