User`s guide

7-15

Status Screens

7.12. PBX Port Status Screens

These screens list parameters for the PBX Ports. There are separate

status screens for PBX Ports A and B. As described in Section 5.4.1, port

parameters are selected via the Port Conﬁguration menus.

Note: NLJ-VIP units do not include PBX Port B.

• Communication Settings: Lists Baud Rate, Parity, Data Bits, Stop

Bits, and Handshake Mode for this port.

• Input Parameters: Selected input parameters for this port:

 Time Date Stamp: When enabled, the VIP will insert a Long

Format or Short Format Time/Date Stamp at the beginning of each

record received via this port.

 Serial Number Stamp: When enabled, a serial number will be

inserted at the beginning of each record received by this port.

 Strip Non-Print: When enabled, the VIP will remove non-printable

characters from all records received via this port.

 End Character: The selected End-of-Record character for

this port.

 Alarm Filter: The Alarm Filter selected for this port.

 Store Alarm Data: Indicates where the VIP will store alarm

records received via this port.

 Data Filter: The Data Filter selected for this port.

 PBX Inact Alarm: The On/Off status of the PBX Inactivity Alarm

for this port.

PollCat NetLink-VIP Version 1.06 11/08/2005 Tue 11:43 1% Full

PBX PORT A:

COMMUNICATION SETTINGS

Com Settings: 9600,E,7,1,None

INPUT PARAMETERS

Time/Date Stamp: Off

Serial # Stamp: Off

Strip Non-Print: On

End Character: ^J

Alarm Filter: None

Store Alarm Data: Alarm

Data Filter: None

PBX Inact Alarm: None

Press <Enter> to return to menu ...

Figure 7.13: PBX Port Status Screen (PBX Port A Shown)