Video Gaming Accessories User Manual
13-4
Command Reference Guide
/C Connect
Establishes a bidirectional connection between two ports. For more information, see
Section 7.1. There are two types of connections:
• Resident Connect: If the /C command specifies only one port, your resident port
will be connected to the specified port.
• Third Party Connect: If the /C command specifies two ports, the unit will connect
the two ports indicated. Third Party Connections can only be initiated by ports and
accounts that permit Supervisor commands.
Notes:
• If your user account does not permit Supervisor commands, you will only be
allowed to connect to ports specifically allowed by that account.
• If the user account permits Supervisor commands, you are allowed to
connect to any port.
• RS232 Ports are not allowed to create a Third Party connection to the
Network Port. For example, Port 1 cannot connect Port 3 to the Network
Port.
Availability:
Supervisor / Non-Supervisor
Format:
/C <x> [x] [Enter]
Where x is the number or name of the port(s) to be connected.
Response:
Verbose:
"Connected xx." When a Resident Connection is initiated, the RSM will
also display the Resident Disconnect Sequence.
Terse: 1
/CP Copy RS232 Port Parameters
Allows quick set-up when several RS232 ports will be configured with similar
parameters. When the /CP command is invoked, the RSM will display a menu that can
be used to copy parameters to RS232 ports. For more information and other command
options, please refer to Section 5.9.
Availability: Supervisor Only
Format:
/CP [Enter]
Response: Displays Copy Parameters Menu.