Classic Adirondack Poly Reclining Chaise Lounge With Arms SKU: OP4009 V1.
• • • • • • • ALLEN WRENCH (PROVIDED) 1 WRENCH (PROVIDED) M6 x 60mm BOLT 2 6 PCS 6 7 WRENCH 3 M6 x 50mm SCREW 4 PCS 22 PCS 1 PC A M6 x 50mm BOLT 4 M6 NUT 6 PCS 5 M6 WASHER 6 PCS M6 ALLEN WRENCH 1 PC LOUNGE BASE 1 PC B FRONT LEG 2 PCS C RAIL 3 PCS Page 1 of 6
PARTS D ARM SUPPORT E 2 PCS G MIDDLE LEG - RIGHT 1 PC J RIGHT CHAIR ARM F 1 PC 1 PC H MIDDLE LEG - LEFT 1 PC LEFT CHAIR ARM I LEFT REAR LEG 1 PC RIGHT REAR LEG 1 PC Page 2 of 6
PRODUCT ASSEMBLY - OVERALL VIEW Look at following overall view of this Lounge and learn the exact position of each parts to be assembled. F I H A E C C C G D J B PRODUCT ASSEMBLY 1 Attach part D Arm support to part H Middle Leg - Left with 2 PCS of hardware 3 Screw. Do the same to attach another arm support to part G Middle Leg - Right.
PRODUCT ASSEMBLY 2 Attach part F Left Chair Arm to part I Left Rear Leg and the assembled part ( H + D ) with 3 sets of hardware 1 bolt, hardware 5 washer and hardware 4 Nut. Do the same to assemble part E Right Chair Arm with part J Right Rear Leg and the assembled part ( G + D ). 4 4 5 4 5 5 F 1 D E 1 I H 1 D J G 3 Place right side of the Lounge on smooth ground as below. Attach the combined part ( I + F + H ) to the left side of the lounge with 5 pcs of hardware 2 Bolt.
PRODUCT ASSEMBLY 4 Attach part C Rail to part B front leg with 1 pc of hardware 2 Bolt. Do the same to attach the other 2 pcs of part C Rail to part H Middle leg-Left & part I Left Rear Leg with 2 pcs of hardware 2 Bolt. 2 2 2 F B H C C C 5 I Place the lounge upside down, attach the combined part ( J + E + G ) to the right side of the lounge with 5 pcs of hardware 2 Bolt. Attach part B Front Leg to the right side of the lounge with 3 pcs of hardware 2 Bolt.
PRODUCT ASSEMBLY 6 Adjust the backrest to a comfortable position and lock the back support to the bracket.
